Digital Durometers arrow Shimana Digital Shore A, D, OO Durometer

Digital Shore A, D, OO Durometer



Part#: SHPMDR176/187/212 Series
Supplier: Shimana
Calibration Certificate: available on request


 The Shimana Digital Durometers available in Shore A (SHPMDR176), Shore D (SHPMDR187) and Shore OO (SHPMDR212) scales will test a wide variety of applications and materials such as: rubber, polyester, pvc, leather, vinyl, polystyrene glass, foam, etc.

 

These Digital Hardness Testers are ergonomically designed to give exact hardness readings with no errors for accurate and repeatable hardness measurement of rubber, plastics and other elastomers.

It is highly recommended that, whenever possible, an operating stand be employed in performing durometer hardness tests.

shimana-shpmdr176-specs.jpg

features

  • Conforms to ASTM D-2240-05, GB/T-531.1-2008/ISO7619-1:2004 standards
  • Large, easy-to-read LCD display with backlight
  • Adjustable dwell time
  • Test counter displays the number of test performed
  • Digital display gives exact reading with no guessing or errors.
  • Statistics, including Averaging mode, Max Mode, Maximum average mode, Peak difference
  • Out—of—tolerance indicators, both audible and visual
  • Delivered with a long life rechargeable battery cell for almost 24 hour of work
  • Automatic power off to conserve power.

 

SHIMANA DEADWEIGHT TEST STAND FOR DUROMETERS

test-stand-for-digital-durometer.jpg These durometers can be used with the Shimana hardness test stand (sold separately or as a kit with durometer) to eliminate the speed and weight variables in hardness measurement. The Shimana Test Stand for Durometers was designed to provide the ASTM recommended forces for use in hardness measurements.

The test stand offers a constant load weight. The mass is centered along the indenter axis, providing a consistent load each and every test.

Using test stand in your hardness applications, the hardness value is not depending on operator force: the lever is used only to release the weight to produce the ASTM recommended force.

The Shimana hardness test stand is the ideal tool for repetitive or lab-type testing for users who must test either very large specimens, or test in a number of different durometer scales.

 

 

specs

  Shore A Shore D Shore OO
Range 0 to 100 HA 0 to 100 HD 0 to 100 HOO
Accuracy ≤ ±1 HA ≤ ±1 HD ≤ ±1 HOO
Resolution 0.1 HA 0.1 HD 0.1 HOO

Display 128 x 64 dot matrix LCD with LED Backlight
Memory 500 records
Measurement Modes Average, Max, Maximum average
Dwell time 1-9 seconds adjustable
Auto power off 3 minutes
Power 3.6VDC 800mAH Ni-MH rechargeable batteries
Life time 20-25 hours
Charger/Adaptor  Input:110~240VAC, output: 5V 1A
Operating temperature -10 to 40°C
Operating humidity 20 to 80%
Dimensions 153 x 50 x 29 mm
Weight about 169g

standard delivery

  • SHIMANA Digital Durometer (Shore A, Shore D or Shore OO)
  • AC adapter
  • Calibration block
  • Data Aquisition Software for Windows PC
  • USB Cable
  • Carrying case

Please note: test blocks sets and test stand are not included. These can be purchased separately.


Ordering info

SKUDescription Durometer TypeIn Stock
SHPMDR176Shore A Digital Durometer Type A 0
SHPMDR187Shore D Digital Durometer Type D 0
SHPMDR212Shore OO Digital Durometer Type OO 0

More Recommendations for Hardness Testers in Canada