Test Block Kits for Durometers arrow Shimana Test Blocks for Durometers

Test Blocks for Durometers

Part#: SHGLDR188/189 Series
Supplier: Shimana
Calibration Certificate: available on request

These Shimana Durometer Test Block Kits are used as a method of determining the operational status of a durometer. Using these test blocks as a reference indicates if a durometer is reading within tolerance. The Durometer Blocks can also be used to train a technician on how to properly take measurements with a durometer.




 It is recommended that you verify that the shore durometer is performing correctly before taking on any rubber/foam/plastic hardness testing measurements by checking the hardness of a rubber test block and then comparing it to the calibration data written on the case. Test blocks are not to be used as a calibration device but only as a reference. Durometer calibration must be accomplished by an accredited lab.


For better hardness measurements using a durometer the user must develop the proper "feel" for the gauge. However, for more accurate, repeatable results the use of a durometer stand is highly recommended. We carry the Shimana SHWSDR059 Series of Shore A and D durometer test stands. The stands includes the proper load weights required for testing in durometer scales (A and D), as noted in ASTM D2240. Used in conjunction with a durometer the stand will eliminate the operator error sometimes associated with shop floor durometer testing.


For periodic verification of a durometer calibration accuracy take an average of 3 readings in different spots on each test block. The results should be close to those shown on the case within ± 2 HA.


  • technicians can perform a quick check for proper durometer operation using these test block kits
  • technicians can use these blocks to train themselfs on how to take better measurements with a durometer


  • color coded test blocks each of which measures ¼" x 2" x 2"
  • 7 Color-Coded Test Blocks for Type A durometers: purple 36 HA, brown 42 HA, green 55HA, orange 67 HA, red 75 HA, yellow 85 HA, black 94 HA
  • 3 Color-Coded Test Blocks for Type D durometers: yellow 32 HD, gray 47 HD, white 88HD

standard delivery

  • Carrying case 1 pc
  • Test blocks: 7 pc for Shore A, 3 pc for Shore D

Ordering info

SKUDescriptionUnitPriceIn Stock
SHGLDR188/189 SeriesShimana Test Blocks for Durometerspiece 0

More Recommendations for Hardness Testers in Canada